Selection and Introduction of Z-type Elevator

Hengshui Changhong Rotary Bucket Conveyor (referred to as rotary bucket) uses two special - material dedicated chains as traction components. The two sides of the hopper are fixed on the chains and arranged continuously. It is a conveyor that uses inflow - type loading and low - speed automatic turning unloading. Its names include: Rotary Bucket Elevator, Z - type Elevator, Z - type Feeder, Z - type Bucket Elevator, C - type Elevator, C - type Feeder, C - type Bucket Elevator, S - type Elevator, T - type Elevator, Non - crushing Elevator, Zero - crushing Elevator, Multi - point Feeding Elevator, Multi - point Discharging Elevator, Packaging Machine - supporting Elevator, Color Sorter - supporting Elevator. The temperature of the conveyed materials can reach 600 degrees.

I. Hopper: To meet the diverse needs of customers, the materials are diverse, including nylon, ABS, PP, stainless steel 304, stainless steel 316L, stainless steel 310, carbon steel, etc. The conveying chain of our rotary bucket conveying machinery adopts a large - pitch self - lubricating roller conveying chain. This reduces the friction loss of the chain during use, extends the service life of the chain, and reduces the maintenance and replacement costs. Machine housing: The whole machine can adopt a carbon steel cold plate with electrostatic spraying or a stainless - steel structure.

II. Applicable industries: This machine is suitable for conveying powdery, granular, and small - to - medium - volume materials, and is used in fields such as the food industry, agricultural and sideline products, chemical and pharmaceutical industries, activated carbon, construction energy, environmental protection treatment, refractory materials, and the military industry.

III. Conveying type: The rotary bucket conveyor conveys materials in a closed body. Materials are conveyed through hoppers suspended on the chain. The modular design enables a wide range of configurations, such as horizontal, vertical, and horizontal - vertical combined conveying. For example, Z - type, C - type, E - type, L - type, R - type. It can also have multiple feeding points and multiple discharging points. The whole machine is fully sealed, pollution - free, leak - free, clean and tidy. It is flexible in composition and can perform vertical and horizontal conveying in a relatively small space, making the conveying machinery easy to install and modify. Even if the equipment is designed with multiple feeding and discharging points, the rotary bucket elevator only needs one drive, which is equivalent to saving a large amount of money in the control system and energy consumption, reducing the number of maintenance of the entire production system and greatly improving the production capacity.

IV. Leak - free overlapping hopper: Feeding is carried out in the horizontal section. All hoppers are overlapped and connected, and with the matching of the feeding port, the best loading state of the hopper can be ensured.

V. Easy installation: Our elevators have always been transported to our customers in a modular way. Customers can choose to install them independently, and finally, our technical personnel will go to the site to check the installation quality. You can also choose to let us complete the installation and commissioning of the whole set of equipment.

VI. Easy maintenance: Our products use high - quality components to ensure stable performance during equipment operation. All our modules are selected with openable connections for easy maintenance. There is a drawer installed in the lower horizontal part of the equipment, which is easy to clean. All inner walls are designed to be smooth to prevent dust accumulation. All bearings are installed outside for easy maintenance. Our R - series rotary bucket elevators are equipped with torque limiters, backstop protectors, and flexible tensioning devices to ensure the stable and safe operation of the equipment.